| a00.de |
|
||
TCP-group 1995
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
1600b on a TNC-2
- To: tcp-group@ucsd.edu
- Subject: 1600b on a TNC-2
- From: kf5mg@kf5mg.ampr.org
- Date: Tue, 10 Jan 95 16:58:58 cst
I ran across a 1 IC mod for a TNC-2 that was suposed to run the TNC
at 1600b instead of 1200b. The mod consist of you piggybacking ( mostly for
parts placement ) a 4017 IC on IC U1 of the TNC. The pins of the 4017 were
connected as follows:
16 +5
15 pin 5 of the 4017
14 pin 9 of U1
13 Ground
12 pin 8 of Switch 2.
8 Ground
5 pin 15 of the 4017
The other pins of the 4017 were cut off.
Has anyone else seen this? Does anyone know why it works? Thanks.
73's de Jack - kf5mg
Internet - kf5mg@kf5mg.ampr.org - 44.28.0.14
- kf5mg@metronet.com - work (looking for)
PBBSnet - kf5mg@kf5mg.#dfw.tx.usa.noam - home (817) 488-4386
+=======================================================================+
+ D.A.M. - Mothers Against Dyslexia +
+=======================================================================+
- Prev by Date: TNC - The Next Generation
- Next by Date: Re: KISS and experimental AX.25
- Previous by thread: TNC - The Next Generation
- Next by thread: Re: 1600b on a TNC-2
- Index(es):
|
Document URL : http://www.a00.de/tcpgroup/1995/msg00050.php Ralf D. Kloth, Ludwigsburg, DE (QRQ.software). < hostmaster at a00.de > [don't send spam] Created 2005-01-02. Last modified 2005-01-02. Your visit 2024-12-26 19:26.21. Page created in 0.0177 sec. [Go to the top of this page] [... to the index page] |